OMD-690 Explosion Proof Oxygen Analyzer

Description

Description

The OMD-690 Explosion Proof Oxygen Analyzer is designed to measure trace oxygen in the parts-per-billion range / sub 1 ppm region but can also be used to measure oxygen up to 1000 parts-per-million. The unit combines an advanced set of electronic features including a smart MENU interface including our innovative touch glass technology with our industry leading leading precision electrochemical oxygen sensor technology. The result is a highly reliable and cost effective design with easy-to-use user interface for petrochemical and chemical applications.

  • Enclosure Type: Explosion Proof Wall Mount
  • Available Ranges: 0 – 1/10/100/1000 PPM & 0 – 25%
  • Range Mode: Auto-Range or Manual Range
  • Resolution: 0.001 PPM
  • Input Power: 100 – 240 VAC
  • Analog Output: 4 – 20mA, 0 – 10V DC, 0 – 1V DC
  • Communication: Bi-Directional MODBUS RS485 RTU

The built in smart MENU interface allow the user to fully configure the analyzer through the onboard MENU system.  No need for a complicated laptop or other control device to setup the analyzer in the field.

Alarm functionality comes in the way of 2 fully adjustable form C non-latching relay contacts. These can be configured as NO or NC and can be set as HIGH or LOW with optional delay mode. A power failure alarm is also standard and comes as a form C non-latching relay contact.

The analyzer is designed as an extractive type unit to draw the sample through its integrated sample system which includes a bypass / isolation valve, flow needle valve and a visual rotameter / flowmeter.

The standard cell (TO2-133) is unaffected by other background gases such as hydrogen, helium, or hydrocarbons. The optional acidic cell (TO2-233) works well when acid gases such as CO2 or Natural Gas are present.  All oxygen sensors are manufactured in house by Southland Sensing Ltd. under a strict ISO9001:2015 / ISO13485:2016 quality system.

The sensors are self-contained and minimal maintenance is required – no need to clean electrodes or add electrolyte.

Direct Fit Field Replacement

Direct Fit Field Replacement

Designed to replace competitive analyzers:

  • Teledyne: 3020T, 3020P
  • AII: GPR-18, GPR-18MS, GPR-28
Product Documentation

Product Documentation

OMD-690 Specification Sheet (PDF Download)