OMD-150 Wall Mount Outdoor Oxygen Analyzer

Descripción

The OMD-150 online oxygen analyzer is designed to measure oxygen from 0.01 parts-per-million up to 100%.  The unit combines an advanced set of electronic features including a smart MENU interface with our industry leading precision electrochemical oxygen sensor technology. The result is a highly reliable and cost effective design with easy-to-use user interface.

• Enclosure Type: Wall Mount; IP66 / NEMA 4X
• Enclosure Material: Rugged Anodized Aluminum
• Standard Ranges: 0 – 10/100/1000/10000 PPM & 25%
• Optional Ranges: 0 – 1/5/10/25 & 100 %
• Resolution: 0.01 PPM or 0.01 %
• Input Power: 2-wire loop, 3-wire, 6-wire

The built in smart MENU interface allow the user to fully configure the analyzer through the onboard MENU system.  No need for a complicated laptop or other control device to setup the analyzer in the field.  Electronic features include 4 – 20mA output (optional isolated 4 – 20mA with 3-wire configuration), (Optional 0 – 10VDC, 0 – 10VDC Analog Output with 6-wire configuration), (Optional Bi-Directional Modbus RS485 ASCII with 6-wire configuration).

The OMD-150 offers 3 distinct input power options to meet most industrial installations.  2-wire loop power with non-isolated 4 – 20mA output, 3-wire power with isolated 4 – 20mA output & 6-wire 12 – 24VDC with non-isolated 4 – 20mA, 0 – 10VDC and 0 – 1VDC.

El sensor de oxígeno se basa en el principio galvánico electroquímico de las pilas de combustible y se fabrica internamente siguiendo un estricto procedimiento de calidad. Los sensores son autónomos y requieren un mantenimiento mínimo, sin necesidad de limpiar los electrodos ni añadir electrolito. Estos sensores de precisión ofrecen un rendimiento, una precisión y una estabilidad excelentes, al tiempo que maximizan la vida útil prevista.

The analyzer comes with multiple ranges from 0 – 10 PPM up to 0 – 100%. It can be configured for trace (PPM), percent, or purity oxygen analysis using the onboard menu and appropriate sensor. Sensors designed for acidic/CO2 background gas applications are available as well.

Gas fittings are available as 6 mm, 1/8″ or 1/4″ compression tube fittings.