SOUTHLAND (PRIMARY LOGO)
首页
Trace Oxygen Verification at Point-of-Use Gas Distribution

Trace Oxygen Verification at Point-of-Use Gas Distribution

Final-Stage Purity Confirmation Before Specialty Gas Reaches the Customer Process — OMD-675

The purity of specialty gas measured at its source does not necessarily guarantee the same purity at the point of use. Distribution piping, connections, maintenance activities, and local equipment can introduce contamination before the gas reaches the customer’s process. Point-of-use oxygen verification helps suppliers and end users confirm that delivered gas meets established oxygen purity specifications.

The OMD-675 provides continuous ultra-trace oxygen measurement from designated point-of-use sampling locations, helping operators detect oxygen contamination and verify gas quality immediately before delivery to sensitive manufacturing processes.

  • Point-of-Use Verification
  • Final Purity Checkpoint
  • Customer Process Protection
  • Sub-PPM Sensitivity

Why Point-of-Use Verification Matters

Gas quality can change between the source and the point of use due to contamination introduced during maintenance, inadequate purging, or issues with local piping and connections that upstream monitoring may not detect. Continuous point-of-use oxygen monitoring helps gas suppliers and their customers verify that oxygen concentrations remain within established specifications at the final delivery point, where gas purity is critical to process performance.

Where It's Used

  • Customer process gas inlet monitoring — final verification before use
  • Local distribution system troubleshooting — isolating contamination introduced after delivery
  • Service and maintenance verification — confirming purity after local system work
  • Supplier-customer purity dispute resolution — providing independent point-of-use data

Recommended Analyzer

OMD-675 Ultra-Trace Oxygen Analyzer

The OMD-675 provides highly sensitive, continuous ultra-trace oxygen measurement suited to the stringent purity requirements of point-of-use specialty gas applications. By analyzing gas extracted from a designated sampling point near the final process connection, it helps operators verify oxygen concentrations before the gas enters sensitive manufacturing equipment.

The OMD-675 can be installed in a suitable protected location and connected to the point-of-use gas supply through an appropriately designed sampling system, providing continuous oxygen monitoring without requiring the analyzer to be mounted directly at the process connection.

  • Continuous Oxygen Monitoring
  • 19" Rack Mount Design
  • 4-20 mA / Digital Output
  • High Sensitivity Sensor

主要规格

  • Range: sub-ppm to low-ppm trace oxygen, matched to point-of-use specifications
  • Sensor technology: high-sensitivity, low-drift sensor for final-stage verification
  • Response time: fast enough to catch localized point-of-use contamination events
  • Output: 4-20 mA and digital communication for customer or facility system integration
  • Enclosure: compact design suited to close-to-process installation

常见问题

Gas that meets purity specifications at the source can become contaminated as it travels through distribution piping, valves, fittings, and local equipment. Maintenance activities, inadequate purging, or changes in operating conditions can introduce oxygen contamination that upstream testing may not detect. Point-of-use oxygen monitoring with the OMD-675 helps operators verify that oxygen concentrations remain within established specifications immediately before the gas enters a sensitive manufacturing process.

Yes. Continuous oxygen monitoring at the point of use provides objective measurement data that can help suppliers and customers investigate gas purity concerns. By comparing oxygen concentrations at the supply source and final delivery point, operators can determine whether oxygen contamination may have been introduced within the distribution system. When supported by appropriate calibration records, sampling procedures, and data logging, these measurements can provide useful evidence for troubleshooting and resolving disputes involving oxygen specifications.

The OMD-675 is a rack-mounted ultra-trace oxygen analyzer designed for installation in a suitable equipment rack or protected instrumentation area. It does not need to be mounted directly beside the customer’s process equipment. Gas can be routed from a designated point-of-use sampling connection to the analyzer through an appropriately designed sampling system. Sample line length, flow requirements, and potential contamination should be considered to maintain measurement accuracy and response time.

NEED HELP SPECIFYING AN ANALYZER FOR YOUR OPERATION?

Our application engineers can help confirm the right model for your process conditions.

获取报价 →

←Back to Specialty Gas & UHP Gas Production

All Application Notes →