Início
Trace Oxygen Verification at Point-of-Use Gas Distribution

Trace Oxygen Verification at Point-of-Use Gas Distribution

Final-Stage Purity Confirmation Before Specialty Gas Reaches the Customer Process — OMD-675

The purity of specialty gas measured at the source does not guarantee the same purity at the customer’s point of use, since distribution piping, connections, and local equipment can each introduce contamination along the way. Point-of-use verification gives both suppliers and customers direct confirmation of the gas quality actually delivered to the process.

The OMD-675 provides highly sensitive, continuous point-of-use oxygen monitoring, confirming specialty gas purity at the final connection before it enters a customer’s process.

  • Point-of-Use Verification
  • Final Purity Checkpoint
  • Customer Process Protection
  • Sub-PPM Sensitivity

Why Point-of-Use Verification Matters

Gas quality can degrade between the source and the point of use due to local plumbing, connections, or equipment issues that upstream monitoring cannot detect. Continuous point-of-use verification gives both gas suppliers and their customers confidence that delivered gas meets specification at the point that actually matters — where it enters the process.

Where It's Used

  • Customer process gas inlet monitoring — final verification before use
  • Local distribution system troubleshooting — isolating contamination introduced after delivery
  • Service and maintenance verification — confirming purity after local system work
  • Supplier-customer purity dispute resolution — providing independent point-of-use data

Recommended Analyzer

OMD-675 Ultra-Trace Oxygen Analyzer

The OMD-675 is configured for the high sensitivity required at point-of-use, providing a direct, real-time reading of gas purity at the final connection before a customer’s process.

Its compact form factor suits installation close to the point of use, giving both supplier and customer confidence in delivered gas quality.

  • Continuous Trace O2 Output
  • Compact Point-of-Use Form
  • 4-20 mA / Digital Output
  • High Sensitivity Sensor

Especificações principais

  • Range: sub-ppm to low-ppm trace oxygen, matched to point-of-use specifications
  • Sensor technology: high-sensitivity, low-drift sensor for final-stage verification
  • Response time: fast enough to catch localized point-of-use contamination events
  • Output: 4-20 mA and digital communication for customer or facility system integration
  • Enclosure: compact design suited to close-to-process installation

Perguntas Frequentes

Trace oxygen measurement provides a direct indication of oxygen contamination or crossover into the hydrogen stream. Trending the oxygen concentration can help operators identify changes in electrolyser or purification system performance.

A common measurement point is the hydrogen product stream downstream of the electrolyser stack. Additional measurement points may be used before or after drying and purification equipment depending on the process design and monitoring objectives.

Alarm and control limits should be determined based on the electrolyser manufacturer’s specifications, process conditions, applicable standards, and the facility’s safety requirements rather than using a universal oxygen alarm value.

NEED HELP SPECIFYING AN ANALYZER FOR YOUR OPERATION?

Our application engineers can help confirm the right model for your process conditions.

Solicite um orçamento →

←Back to Specialty Gas & UHP Gas Production

All Application Notes →