SOUTHLAND (PRIMARY LOGO)

PUMP-1001

Online Gas Sampling Pump – 110 - 230 VAC, 50/60 Hz

H2S Scrubber
H2S Scrubber H2S Scrubber H2S Scrubber

Teknik Özellikler:

  • Dimensions: 5.5” H x 3” W x 5” D
  • Wetted Material: 304 Stainless Steel
  • Weight: 3.8 lbs
  • PSIG (MAX Pressure): 29.2 PSIG

Optional Gas Connections:

  • 1/4” Compression Tube Fittings
  • 1/8” Compression Tube Fittings
  • 6mm Compression Tube Fittings
  • 1/8” FNPT
  • Designed for Low Pressure / Low Flow Applications
  • Constant Gas Flow is Pushed into the Analyzer
  • Designed for Continuous Online Use

Southland Sensing’s Online Gas Sampling Pump provides reliable sample gas delivery for continuous gas monitoring and analytical applications. Featuring a durable single-head diaphragm design and optimized eccentric drive mechanism, the pump delivers consistent vacuum and pressure performance while promoting extended diaphragm and bearing life.

For most gas analysis applications, Southland Sensing recommends installing the pump upstream of the analyzer. This configuration pushes sample gas through the measurement system, helping maintain consistent sample flow, minimize response time, and improve measurement stability.

Designed for versatility, the pump can operate as a vacuum pump, compressor, or in applications requiring both functions. Its compact construction, dependable performance, and continuous-duty capabilities make it well suited for industrial gas sampling systems and laboratory instrumentation.

The Wire Colors

WHITE (-): This is your “Common” or neutral wire. BLACK (+): This is the wire you use for 115 Volts 50/60Hz (standard US wall outlet power). RED (+): This is the wire you use for 230 Volts 50/60Hz (heavy-duty appliance power). GREEN (GND): This is your Ground wire. It is there purely for safety to prevent electric shock and must always be connected.

How to Wire the Pump

You will only use two of the three main power wires (Red, Black, White) depending on your power source. The unused wire must be safely capped off so it doesn’t touch anything, as it will have live voltage running through it when the pump is on. Option 1: If you are using standard 115V 50/60Hz power Connect your power source to the WHITE(-) and BLACK(+) wires. Safely cap off the unused RED wire. Connect the GREEN (GND) wire to your ground. Option 2: If you are using 230V 50/60Hz power Connect your power source to the WHITE (-) and RED (+) wires. Safely cap off the unused BLACK wire. Connect the GREEN (GND) wire to your ground.
Uygulama Danışmanlığı Talep Edin

Ürün Dokümantasyonu

PUMP-1001 Specification Sheet