H2S-150 Wall Mount Outdoor H2S Analyzer

Описание

The H2S-150 online H2S analyzer is designed to continuously measure hydrogen sulfide with very little maintenance requirement..  The unit combines an advanced set of electronic features including a smart MENU interface with our industry leading precision H2S sensor technology. The result is a highly reliable and cost effective design with easy-to-use user interface.

• Enclosure Type: Wall Mount; IP66 / NEMA 4X
• Enclosure Material: Rugged Anodized Aluminum
• Стандартные диапазоны: 0 - 10/50/100/200 PPM
• Дополнительные диапазоны: 0 - 100/500/1000/2000 PPM
• Optional Ranges: 0 – 1000/2000/5000/10000 PPM
• Разрешение: 0,01 PPM, 0,1 PPM или 1 PPM
• Input Power: 12 – 24V DC

The built in smart MENU interface allow the user to fully configure the analyzer through the onboard MENU system.  No need for a complicated laptop or other control device to setup the analyzer in the field.

The H2S-150 comes in a 6-wire configuration with 12 – 24V DC input power and non-isolated 4 – 20mA, 0 – 10VDC and 0 – 1VDC analog output.

The H2S sensor is based on the galvanic electrochemical fuel cell principal.  The sensors are self contained and minimal maintenance is required – no need to clean electrodes or add electrolyte.  The precision sensors offer excellent performance, accuracy and stability while maximizing the expected life.  The analyzer comes with 3 optional sensors, The H2S-1x has four ranges 0 – 10 ppm, 0 – 50 ppm, 0 – 100 ppm, 0 – 200 ppm.  The H2S-2x has 0 – 100 ppm, 0 – 500 ppm, 0 – 1000 ppm and 0 – 2000 ppm. The H2S-3x has 0 – 1000 ppm, 0 – 2000 ppm, 0 – 5000 ppm, and 0 – 10000 ppm.

Датчики являются автономными и требуют минимального обслуживания - не нужно чистить электроды или добавлять электролит.

Основные области применения этого анализатора - природный газ, свалки и биогаз.