SOUTHLAND (PRIMARY LOGO)
Главная
Oxygen Monitoring in Hydrogen Electrolyzer Dryer & Purification Skids

Oxygen Monitoring in Hydrogen Electrolyzer Dryer & Purification Skids

Verifying Trace O₂ Purity Downstream of Electrolyzer Drying & Purification — OMD-507

  • Hydrogen Drying Systems
  • PSA & TSA Purification
  • Post-Electrolysis Quality Control
  • Process Safety Monitoring

Hydrogen produced through water electrolysis often requires additional drying and purification before storage, compression, or distribution. Depending on the process design and required hydrogen purity, purification systems may incorporate desiccant dryers, pressure swing adsorption (PSA), temperature swing adsorption (TSA), or catalytic oxygen removal technologies to reduce residual moisture and oxygen contamination.

Сайт Southland Sensing OMD-625 Trace Oxygen Analyzer provides continuous measurement of trace oxygen concentrations in hydrogen gas streams, allowing operators to monitor purification system performance and verify that oxygen levels remain within specified limits. With ATEX and IECEx hazardous-area certification, the OMD-625 is well suited for appropriately designed hydrogen purification installations requiring reliable oxygen monitoring in classified environments.

Why Trace Oxygen Monitoring Matters

Hydrogen drying and purification systems are designed to remove specific impurities and achieve the required product gas quality. While dryers primarily remove moisture, dedicated oxygen removal systems, such as catalytic deoxo units, reduce residual oxygen concentrations. Changes in catalyst performance, valve operation, or purification system conditions can allow oxygen contamination to exceed specified limits.

Continuous trace oxygen monitoring at the purification skid outlet allows operators to verify oxygen removal performance, identify unexpected changes in gas quality, and confirm that oxygen concentrations remain within the required specification before hydrogen enters downstream storage, compression, or distribution systems.

Where It’s Used

  • Hydrogen Purification skid outlets, downstream of PSA/TSA or deoxo units
  • Dryer bed regeneration cycle verification
  • Fuel Cell Grade Hydrogen Purity Verification
  • Catalytic Deoxo Oxygen Removal Systems

Recommended Analyzer

omd-625
OMD-625 Trace Oxygen Process Analyzer, CE

Designed for continuous trace oxygen measurement in industrial process gas streams, the Southland Sensing OMD-625 Trace Oxygen Analyzer combines precision electrochemical sensor technology with a rugged stainless steel enclosure and ATEX/IECEx hazardous-area certification. The analyzer provides reliable, low-maintenance oxygen monitoring for hydrogen purification systems and other demanding industrial applications.

For hydrogen drying and purification applications, the OMD-625 is typically configured to monitor gas quality at the purification skid outlet, providing continuous oxygen concentration measurements and adjustable alarm outputs. This allows operators to identify changes in oxygen removal performance, detect potential catalyst degradation, and monitor product gas quality before hydrogen enters downstream storage, compression, or distribution systems.

  • Непрерывный мониторинг процесса
  • ppm-Level Trace O₂ Range
  • 4-20mA / Relay Outputs
  • Wall or Pole Mount Design

Key Specifications for Dryer & Purification Skid Use

  • Measurement Range: 0–10 ppm to 0–10,000 ppm O₂
  • Sensor Technology: Precision Electrochemical Oxygen Sensor
  • Hazardous Area Certification: ATEX & IECEx, Zone 1, IIB + H₂
  • Sample Conditioning: Compatible with standard flow-through sample systems
  • Digital Communication: Optional RS-485 Modbus RTU

Часто задаваемые вопросы

 

Continuous trace oxygen monitoring helps verify oxygen removal performance, detect changes in purification efficiency, and confirm that hydrogen product gas remains within specified oxygen limits before entering downstream storage, compression, or distribution systems.

The oxygen analyzer is typically connected to a sample point at the purification skid outlet, where it can continuously monitor final product gas quality. Additional measurement points may be installed before and after dedicated oxygen removal stages to evaluate purification performance.

Yes. The OMD-625 utilizes electrochemical oxygen sensor technology suitable for trace oxygen measurement in hydrogen background gas. Proper sample pressure regulation, flow control, and gas compatibility verification are important for accurate and reliable operation.

Need Help Specifying an Analyzer for Your Purification Skid?

Our application engineers can help confirm the right model and installation point for your dryer or purification system.

Запросить расчет стоимости →
← Back to Hydrogen Gas Analysis Applications
All Application Notes →