SOUTHLAND (PRIMARY LOGO)
Accueil
Surveillance de l'oxygène lors de la cuisson de composites en autoclave

Surveillance de l'oxygène lors de la cuisson de composites en autoclave

Process Atmosphere Verification for Aerospace Composite Manufacturing OMD-190

Aerospace composite manufacturing commonly uses autoclaves to cure carbon fiber and other advanced composite components under controlled temperature and pressure. While many autoclaves operate with compressed air, certain specialized curing processes may use nitrogen or another controlled atmosphere to limit oxygen exposure or meet specific material processing requirements.

For applications requiring an oxygen-controlled atmosphere, continuous oxygen concentration monitoring can help operators verify gas composition and identify deviations during the curing cycle.

The OMD-190 process oxygen analyzer provides continuous oxygen concentration measurement from a properly designed autoclave gas sampling system. When configured for the applicable oxygen range and operating conditions, it supports atmosphere monitoring in specialized composite curing processes.

  • Autoclave Process QC
  • Composite Cure Quality
  • Nitrogen Atmosphere Verification
  • Surveillance continue des processus

Why Autoclave Atmosphere Monitoring Matters

In specialized composite curing processes that require a nitrogen or other oxygen-controlled atmosphere, maintaining the specified oxygen concentration can be important for consistent processing conditions and material quality.

Continuous oxygen monitoring during the autoclave cure cycle helps operators verify that the intended atmosphere is maintained and identify unexpected changes in oxygen concentration. When integrated with an external data recording system, the OMD-190 can provide oxygen measurement records to support process traceability, quality documentation, and applicable manufacturing requirements.

Where It's Used

  • Autoclave cure cycle monitoring continuous atmosphere verification from ramp-up through cool-down
  • Nitrogen purge verification confirming oxygen has reached target level before cure begins
  • Process qualification and certification documenting atmosphere conditions for aerospace quality records
  • Multi-part batch curing verifying consistent atmosphere across autoclave loads

Recommended Analyzer

OMD-190 Process Oxygen Analyzer

The OMD-190 provides stable, continuous oxygen concentration measurement for specialized aerospace composite curing processes requiring a controlled oxygen atmosphere.

When connected to an appropriately designed autoclave gas sampling system, the OMD-190 provides continuous oxygen concentration data throughout the curing cycle. Its measurement output can be integrated with compatible process control and external data recording systems, helping engineers monitor atmosphere conditions, identify deviations, and maintain records for process traceability and quality documentation.

  • Surveillance continue des processus
  • Cure-Cycle Tracking
  • 4-20 mA Output
  • Panel Mount Enclosure with Remote Sensor

Spécifications principales

  • Range: PPM and Percent O2 measurement, covering ambient down to well-purged autoclave conditions
  • Response time: fast enough to track atmosphere throughout the cure cycle
  • Sensor technology: process-grade sensor suited to continuous autoclave duty
  • Output: 4-20 mA for integration with autoclave process control systems
  • Enclosure: rugged housing suited to composite manufacturing facility installation

Foire aux questions

While most aerospace composite autoclaves use compressed air, certain specialized curing processes may require nitrogen to provide an inert or oxygen-controlled atmosphere. Nitrogen can help limit oxygen exposure when specified by the resin system, material manufacturer, or validated curing procedure.

For these applications, continuous oxygen monitoring with the OMD-190 helps operators verify that the specified atmosphere is maintained throughout the cure cycle. The appropriate oxygen concentration depends on the material and process requirements rather than a universal aerospace curing specification.

The OMD-190 provides continuous oxygen concentration measurements during autoclave curing processes that require a controlled atmosphere. Its measurement output can be connected to compatible external data logging or process control systems to record oxygen concentration throughout the cure cycle.

These records can help manufacturers document atmosphere conditions, identify deviations from established process specifications, and maintain traceability for internal quality assurance and customer requirements. The OMD-190 supplies oxygen measurement data but does not independently certify composite cure quality or compliance with aerospace standards.

Yes. The OMD-190 can continuously monitor oxygen concentration throughout an autoclave curing cycle when connected to an appropriately designed gas sampling system.

The analyzer provides real-time oxygen measurements that can be integrated with compatible autoclave control and external data logging systems. This allows operators to track oxygen concentration during heating, curing, and cooling stages, helping identify atmosphere deviations and document process conditions.

The sampling system must be designed to accommodate the autoclave’s operating pressures, temperatures, and gas composition. The OMD-190 measures oxygen concentration rather than temperature, pressure, or other curing parameters.

NEED HELP SPECIFYING AN ANALYZER FOR YOUR OPERATION?

Our application engineers can help confirm the right model for your process conditions.

Demander un devis →

← Back to Oil, Gas, Chemical & Petrochemical Applications

All Application Notes →