H₂S Monitoring in Biogas & Renewable Natural Gas

Verifying Desulfurization Performance from Digester to Pipeline Injection — H2S-625

Raw biogas from anaerobic digesters and landfills can contain hydrogen sulfide concentrations ranging from a few ppm to several thousand ppm, often exceeding the limits acceptable for pipeline injection or engine-generator operation. Desulfurization systems, including biological scrubbers, activated carbon, and iron sponge media, are used to reduce H₂S concentrations before the gas is utilized or upgraded to renewable natural gas.

"(《世界人权宣言》) Southland Sensing H2S-625 provides continuous hydrogen sulfide monitoring at selected process points, including raw gas inlets and downstream treatment outlets. These measurements help operators evaluate desulfurization performance, detect H₂S breakthrough, and verify compliance with applicable gas quality specifications.

Why H₂S Monitoring in Biogas Systems Matters

High H₂S concentrations in raw biogas can contribute to corrosion and damage in combined heat and power engines, generators, and other downstream equipment. Hydrogen sulfide also presents a significant health hazard to personnel working around digesters and gas handling systems. Renewable natural gas intended for pipeline injection must meet the receiving pipeline operator’s gas quality specifications, which often limit H₂S to only a few ppm. Continuous monitoring helps verify desulfurization performance and detect H₂S breakthrough before the gas enters downstream equipment or pipeline distribution systems.

Where It's Used

Raw digester gas monitoring — establishing baseline H2S entering the treatment system
Scrubber and desulfurization outlet verification — confirming treatment media is performing
RNG pipeline injection quality checks — verifying gas meets pipeline H2S specification
Biogas CHP engine protection — monitoring fuel gas quality ahead of engines and generators

Recommended Analyzer

H2S-625 Continuous H₂S Process Analyzer

The H2S-625 is available in configurations suited to both high-ppm raw biogas monitoring and low-ppm verification of treated, pipeline-ready gas, making it adaptable across a biogas upgrading facility.

Continuous output lets facility operators trend desulfurization performance over time and identify media replacement or scrubber maintenance needs before treated gas quality is affected.

主要规格

Range: high-ppm option for raw digester gas, low-ppm option for treated/RNG verification
Wetted materials: selected for resistance to wet, corrosive biogas conditions
Sensor technology: electrochemical sensor rated for continuous sour gas duty
Output: 4-20 mA and Optional MODBUS RTU for integration with control systems
Enclosure: suitable for outdoor digester and gas upgrading skid installation

常见问题

How much H₂S is typically present in raw digester or landfill gas?

Hydrogen sulfide concentrations can range from a few ppm to several thousand ppm, depending on the feedstock, biological activity, and operating conditions. Continuous monitoring helps operators evaluate incoming gas quality and desulfurization requirements.

What H₂S level is required before RNG can be injected into the pipeline?

Allowable H₂S concentrations depend on the receiving pipeline operator’s gas quality specifications and applicable regulations. Pipeline injection requirements may limit H₂S to only a few ppm, making verification after desulfurization an important part of gas quality monitoring.

Can the same analyzer platform monitor both raw and treated biogas?

The H2S-625 can be configured for different H₂S measurement ranges, allowing monitoring of raw or treated biogas streams. Analyzer range, sample conditioning, and gas composition should be evaluated for each measurement location.

NEED HELP SPECIFYING AN ANALYZER FOR YOUR OPERATION?

Our application engineers can help confirm the right model for your process conditions.

← Back to Oil, Gas, Chemical & Petrochemical Applications

All Application Notes →