Oxygen Deficiency Monitoring for Liquid Nitrogen Freezers
Fixed Area Safety Monitoring for Cryogenic Sample Storage Rooms — OMD-351
Liquid nitrogen freezers used for biological sample, cell line, and specimen storage continuously boil off nitrogen gas as they maintain cryogenic temperatures, and in enclosed storage rooms this steady vapor release can gradually lower oxygen levels, especially with multiple freezers or limited ventilation. A malfunctioning freezer or overfill can accelerate this risk sharply.
The OMD-351 fixed area oxygen monitor gives cryogenic storage rooms continuous safety coverage, alarming if oxygen levels drop due to normal boil-off, a freezer malfunction, or a fill line issue.
- Cryo Storage Safety
- LN2 Boil-Off Protection
- Audible & Visual Alarms
- Continuous Safety Monitoring
Why Cryo Storage Oxygen Safety Matters
Rooms housing multiple liquid nitrogen freezers accumulate boil-off gas continuously, and because nitrogen is odorless and can be denser than warm room air near the floor, oxygen levels can drop gradually without any obvious warning sign. Continuous area monitoring with audible and visual alarms protects staff working around sample storage freezers day to day and during fill operations.
Where It's Used
- Biobank and sample storage rooms — continuous monitoring across multiple LN2 freezer units
- Cell line and specimen repositories — safety coverage for long-term cryogenic storage areas
- Freezer fill and service areas — monitoring during liquid nitrogen top-off operations
- Walk-in cryogenic storage rooms — supporting safe entry procedures for staff
Recommended Analyzer
The OMD-351 is a fixed, wall or panel-mounted oxygen deficiency monitor designed to provide continuous area safety coverage in liquid nitrogen freezer storage rooms.
With integral audible and visual alarms, the OMD-351 alerts staff immediately if oxygen levels drop due to boil-off accumulation or a freezer malfunction, supporting safe entry and evacuation.
- Continuous Area Monitoring
- Audible & Visual Alarms
- 4-20 mA Output
- Fixed Wall-Mount Design
Especificações principais
- Range: 0 – 25% O2, covering normal atmosphere down to hazardous deficiency levels
- Alarms: dual-stage audible and visual alarms configurable to facility safety thresholds
- Response time: fast detection suited to gradual boil-off and sudden leak scenarios alike
- Output: 4-20 mA for integration with facility safety and BMS systems
- Enclosure: fixed wall or panel-mount design suited to cryogenic storage room installation
Perguntas Frequentes
Trace oxygen measurement provides a direct indication of oxygen contamination or crossover into the hydrogen stream. Trending the oxygen concentration can help operators identify changes in electrolyser or purification system performance.
A common measurement point is the hydrogen product stream downstream of the electrolyser stack. Additional measurement points may be used before or after drying and purification equipment depending on the process design and monitoring objectives.
Alarm and control limits should be determined based on the electrolyser manufacturer’s specifications, process conditions, applicable standards, and the facility’s safety requirements rather than using a universal oxygen alarm value.
NEED HELP SPECIFYING AN ANALYZER FOR YOUR OPERATION?
Our application engineers can help confirm the right model for your process conditions.
English 
German 
Chinese 
Spanish 
Japanese 
Russian 
Portuguese 
French 
Vietnamese 
Korean 
Turkish 
Italian 
Arabic 
Ukrainian