OMD-501X Oxygen Analyzer, 1/4 DIN

説明

The OMD-501X online oxygen analyzer with its small, compact 1/4 DIN panel mount design and remote sensor housing is is designed to measure oxygen from 0.01 parts-per-million up to 100%.  The unit combines an advanced set of electronic features including a smart MENU interface with our industry leading precision electrochemical oxygen sensor technology. The result is a highly reliable and cost effective design with easy-to-use user interface.  Designed for general purpose type installations such as inert glovebox systems and O2 / N2 generators.

• Enclosure Type: Panel Mount 1/4 Cutout
• エンクロージャーの材質堅牢な陽極酸化アルミニウム
• Sensor Housing: Remote with 72″ Cable
• 標準レンジ0 - 10/100/1000/10000 ppm & 25%
• オプションレンジ0 - 1/5/10/25 & 100 %
• レンジモードオートレンジまたはマニュアルレンジ
• 分解能0.01 PPMまたは0.01 %
• Input Power: 100 – 240 VAC or 12 – 28 VDC
• アナログ出力4 - 20mA
• 通信双方向MODBUS RS485 ASCII
• アラーム：2つの完全調整可能なフォームCリレー接点

The built in smart MENU interface allow the user to fully configure the analyzer through the onboard MENU system.  No need for a complicated laptop or other control device to setup the analyzer in the field.  The electronics are highly reliable and feature-packed and include 4 – 20mA analog output, RANGE ID 1 – 5VDC output, 2 alarm relay contacts, bi-directional Modbus RS485 ASCII communication protocol, multiple analysis ranges, and a 10 – 28 VDC or 100 – 240 VAC power input.

The oxygen sensor is based on the galvanic electrochemical fuel cell principal and is manufactured in house under a strict quality procedure. The sensors are self contained and minimal maintenance is required – no need to clean electrodes or add electrolyte. The precision sensors offer excellent performance, accuracy and stability while maximizing the expected life.

The analyzer comes with multiple ranges from 0 – 10 PPM up to 0 – 100%. Optional sensors can be configured for PPM or Percent oxygen analysis, sensors designed for Inert or CO2 background gases applications are also available.

Sensor housing is remote and includes a 6 foot cable.  Optional sensor housings include direct fit KF-40 (inert glove box, NW40F) or flow through housing (6 mm, 1/8″ or 1/4″ compression tube fittings).